Gotek on IBM PS/2 Model 55sx

My floppydrive died on me. It was an IC that cracked. Could not find a replacement. I made a cable so that i could use a Gotek with FlashFloppy

The cable from the motherboard 34Pin. So its fits directly on the Gotek. But since power is coming on the same cable we had to modify it.

Pin 3 = 5V
Pin 6 = 12V
Pin 5 and 13 = Ground.
So i extracted those wires and soldered them to the a 4-pin Molex power connector. Red = 5V and Yellow = 12V

Jumpers on Gotek:

FF.CFG:
interface = ibmpc-hdout
host=pc-dos

Thats it.